A board can look like a magnificent industrial hive and still produce a dull game if every route leads through the same firing lane. When building a Necromunda terrain board, the real job is not simply filling the table with gantries, pipes and ruined machinery. It is creating a contested underhive where a juve can slip through a service corridor, a heavy can claim a dangerous perch, and every advance asks a player to weigh cover against position.
Necromunda rewards terrain with character, but it also exposes bad table design quickly. Too open, and high-strength shooting dominates. Too crowded, and movement becomes a queue of miniatures shuffling through bottlenecks. The best boards feel hostile, vertical and specific, while still giving every gang a route to a meaningful decision.
Start Building a Necromunda Terrain Board Around Play
Before cutting a single floor plate, decide what your board needs to do. A permanent 4 ft by 4 ft board can support a highly connected hive sector, while modular tiles suit clubs, kitchen tables and players who want a different battlefield for each campaign. Both approaches work. The trade-off is between a carefully authored environment and the flexibility to rearrange your terrain between games.
Sketch the board as a network rather than a scenic diorama. Mark the main ground-level routes first, then identify raised routes, dead ends and shortcuts. Every quarter of the battlefield should offer at least two ways in or out. If a fighter climbs to a platform only to discover there is one ladder back down, it may look atmospheric, but it is usually a trap rather than a tactical choice.
Think in distinct zones. One area might be a dense hab-block with short sightlines and multiple doorways. Another could be a chemical works filled with tanks, pipe runs and scattered hard cover. A central transit gantry can become the dangerous place where gangs meet. Giving each zone a job makes a board memorable and makes scenario setup faster.
Choose a footprint that suits your collection
A 4 ft by 4 ft surface is the familiar starting point, but the board does not need to be a single uninterrupted slab. Four 2 ft square tiles are easier to store, transport and reconfigure. They also let you replace one tile with an industrial sump, a market sector or a collapsed manufactorum when a campaign needs a change of scenery.
Build with the miniatures you actually use. Check that common bases fit on walkways, that tall fighters can stand beneath overhangs, and that a model can be moved without knocking three other pieces over. A 25 mm-wide catwalk may look suitably precarious, but 40-50 mm often plays better once railings, scenery and hands are involved. If a platform is intended for several fighters, make it broad enough for them to stand there without balancing on rivets.
Make Height Matter Without Making It Safe
Verticality is the heart of an underhive table. It should offer tempting firing positions, surprise charges and alternate routes, not a collection of inaccessible towers. Aim for at least three usable levels across key parts of the board: ground level, a mid-level of platforms and bridges, and one or two elevated positions with genuine battlefield influence.
Every raised position needs more than one access point wherever possible. Ladders are useful, but mix them with stairs, ramps, broken walls, cargo lifts and adjacent structures that can be climbed. Different access types create different risks. A broad stair gives reliable movement but is easy to watch; a ladder is compact but leaves a fighter exposed; a damaged walkway may be the quick route that nobody wants to trust.
Do not make the tallest point the best place on the board by default. Give it partial cover, limited room, a vulnerable approach, or sightlines broken by pipes and ducting. Conversely, a lower platform beside an objective can be valuable because it offers cover and access rather than raw elevation. That distinction keeps fighters moving instead of turning each game into a race for the same roof.
Connections deserve as much attention as buildings. A single long bridge across the middle may look dramatic, but it can create a predictable killing ground. Offset bridges, cross-links and short connecting walkways allow fighters to change level without retracing their route. Leave enough gaps that falling remains a credible threat, but avoid gaps so wide that the upper board becomes irrelevant.
Control Sightlines and Cover
The quickest test for a terrain board is to crouch to miniature height and look across it. If you can see from one deployment area to the other through a clean corridor, break that line. If no model can see beyond a few inches, open one or two deliberate firing lanes. The aim is tension, not blanket safety.
Use terrain in layers. Large structures should block whole sections of the board, while pipes, barricades, crates, machinery and scattered scrap provide the cover that lets fighters cross open ground. Hard cover near objectives is especially useful, but avoid placing identical cover in perfectly symmetrical positions. Necromunda benefits from uneven territory and imperfect plans.
Be careful with dense visual detail. A board packed with cables, dangling chains and tiny resin greebles can be spectacular, but fragile details snag sleeves and make model placement frustrating. Keep the most delicate parts on removable scenery or high areas that are not handled constantly. Durable, game-facing details belong on the routes where players will reach most often.
Build for Rearrangement and Scenario Play
Fixed terrain can tell a strong story, but removable pieces give a campaign room to breathe. Design your core board as streets, platforms and structural shells, then add freestanding scatter terrain: generators, market stalls, barricades, industrial tanks, cargo pallets and objective markers. Shifting these pieces changes cover, routes and the identity of a familiar table in minutes.
Magnetising every wall and gantry is rarely necessary. It adds expense and can slow the build. Simple locating tabs, recessed slots, dowels or textured contact points are often enough to stop terrain skating about during play. Reserve magnets for elements that genuinely need them, such as removable ladders, doors, signs or interchangeable bridge sections.
A useful terrain collection includes more than imposing buildings. Build a few pieces with clear game functions: a large line-of-sight blocker, a climbable tower, a low piece of cover, an objective platform and a hazardous-looking obstacle. When a scenario calls for loot crates, an extraction point or a defended terminal, you will have something that looks intentional rather than improvised.
A practical build order
Work from structure to surface detail. This prevents the common mistake of spending hours on pipes and signage before discovering that a walkway has no sensible support.
1. Establish the board footprint and major ground-level structures.
2. Add upper floors, platforms and at least two routes between important levels.
3. Test movement with based miniatures, including bulkier fighters and weapon poses.
4. Add blocking pieces and scatter cover, then test deployment and long sightlines.
5. Finish with railings, pipes, cables, signage, debris and other hive-specific details.
Run a dry game before committing to paint. You will spot awkward ladders, overly dominant firing nests and terrain that prevents hands reaching miniatures. Changing a bare walkway is painless; changing a fully weathered one is not.
Paint the Hive as a Working Place
A restrained palette makes a dense board easier to read during a game. Choose a dominant industrial base colour, a secondary structural tone and one or two accent colours for doors, hazard markings and factional graffiti. Rust, oil staining and dust should support that palette, not conceal it beneath uniform brown weathering.
Use colour to communicate play. A yellow-striped edge suggests a drop. A red door or control panel draws attention to an objective. Different pipe colours can imply chemical lines, coolant systems or power conduits. This kind of visual language helps players understand the board at a glance while making the sector feel inhabited.
If you add lights, treat them as atmosphere rather than a requirement. Battery boxes, wires and fragile LEDs complicate storage and repair. Painted glow effects, bright signs and carefully placed spot colours often create the same nocturnal industrial mood with far less maintenance.
A good hive board should gain history as the campaign progresses. Add a new barricade after a turf war, close a route with a collapsed bulkhead, or place fresh graffiti where a gang claimed a victory. The terrain then becomes more than a backdrop. It becomes the scarred territory your gangs are fighting to own.